NotcHead Shop Grip Commercial Kit Perfect for when you want multiple NotcHead Grips but don't want redundant collet sizes and never have to change out sizes. The Commercial Kit comes with three complete grips, each with a different sized collet; #4 - #10, 1/4" - 3/8", and the new 7/16" - 1/2".Hard Anodized Aluminum for Extreme Durability Limited Lifet

Quick, Safe and Professional

Centered set screw means you drill and tap holes right where you want your line to go. Lines easily 'snap in' with a push of your finger and eliminate the need for Z-bends to adjust for fittings.

Made from high strength Copolymer Acetal plastic, NotcHead Line Clamps are heat-resistant with a melting point of 330° F, have low moisture sensitivity, are very wear resistant and easy on painted parts.


After the line is installed, the set screw is completely hidden, giving a clean, elegant look.

NotcHead clamp names are in relation to the hose it is designed to hold. Most hose sizes are named for the Inside Diameter they have so check the list below to see if there is a size our Clamps will fit what you need.

         Part#                 Description                                          Inside Diameter of Clip
Hard Line Series                                                                     Approx. / Actual

• 1316-6           3/16 hardline                                              3/16” / .1875
• 1416-6           1/4 hardline                                                1/4" / .250
• 1616-6           3/8 hardline                                                3/8” / .375
• 1816-6           1/2 hardline                                                1/2" / .500

• 2316-6           -3AN braided line                                      1/4" / .234  
• 2416-6           -4AN braided line                                      7/16” / .438
• 2616-6           -6AN braided line                                      9/16” / .531
• 2816-6           -8AN braided line                                      5/8” / .620

• 3080-6           1/2 heater hose and #6 A/C                   3/4" / .745  
• 3100-6           5/8 heater hose and #8 A/C                   7/8” / .870
• 3120-6           3/4 heater hose and #10 A/C                       1”/.990

• 4500              #6 Firewall ring                                          3/4” / .780
• 4600              #8 Firewall ring                                          7/8” / .910
• 4700              #10 Firewall ring                                           1” / 1.018

Upgrade to NotcHead Braided Line Clamps.  Allowing for snap in and snap out for ease of the maintenance and cleaning.  Keeping the Lines off your painted surfaces and capable of running parallel lines; NotcHead Braided Line Clamps take your project to the next level.

Made from heat resistant Copolymer Aectal.

• Sold in packs of 6
• With all the Hardware needed to mount

Upgrade to NotcHead Braided Line Clamps.  Allowing for snap in and snap out for ease of the maintenance and cleaning.  Keeping the Lines off your painted surfaces and capable of running parallel lines; NotcHead Braided Line Clamps take your project to the next level.

Made from heat resistant Copolymer Aectal.

• Sold in packs of 6
• With all the Hardware needed to mount

Upgrade to NotcHead Braided Line Clamps.  Allowing for snap in and snap out for ease of the maintenance and cleaning.  Keeping the Lines off your painted surfaces and capable of running parallel lines; NotcHead Braided Line Clamps take your project to the next level.

Made from heat resistant Copolymer Aectal.

• Sold in packs of 6
• With all the Hardware needed to mount

Upgrade to NotcHead Braided Line Clamps.  Allowing for snap in and snap out for ease of the maintenance and cleaning.  Keeping the Lines off your painted surfaces and capable of running parallel lines; NotcHead Braided Line Clamps take your project to the next level.

Made from heat resistant Copolymer Aectal.

• Sold in packs of 6
• With all the Hardware needed to mount

Upgrade to NotcHead Soft Line Clamps.  Allowing for snap in and snap out for ease of the maintenance and cleaning.  Keeping the Lines off your painted surfaces and capable of running parallel lines; NotcHead Soft Line Clamps take your project to the next level.

Made from heat resistant Copolymer Aectal and sold in 6 packs with bolts, nuts and self drilling screws.

Centered set screw means you drill and tap holes right where you want your line to go. Lines easily 'snap in' with a push of your finger and eliminate the need for zip ties to run lines in parallel.

Made from high strength Copolymer Acetal plastic, NotcHead Line Clamps are heat-resistant with a melting point of 330° F, have low moisture sensitivity, are very wear resistant and easy on painted parts.

After the line is installed, the set screw is completely hidden, giving a clean, elegant look.

NotcHead clamp names are in relation to the hose it is designed to hold.

Upgrade to NotcHead Soft Line Clamps.  Allowing for snap in and snap out for ease of the maintenance and cleaning.  Keeping the Lines off your painted surfaces and capable of running parallel lines; NotcHead Soft Line Clamps take your project to the next level.

Made from heat resistant Copolymer Aectal and sold in 6 packs with bolts, nuts and self drilling screws.

Centered set screw means you drill and tap holes right where you want your line to go. Lines easily 'snap in' with a push of your finger and eliminate the need for zip ties to run lines in parallel.

Made from high strength Copolymer Acetal plastic, NotcHead Line Clamps are heat-resistant with a melting point of 330° F, have low moisture sensitivity, are very wear resistant and easy on painted parts.

After the line is installed, the set screw is completely hidden, giving a clean, elegant look.

NotcHead clamp names are in relation to the hose it is designed to hold.

Upgrade to NotcHead Soft Line Clamps.  Allowing for snap in and snap out for ease of the maintenance and cleaning.  Keeping the Lines off your painted surfaces and capable of running parallel lines; NotcHead Soft Line Clamps take your project to the next level.

Made from heat resistant Copolymer Aectal and sold in 6 packs with bolts, nuts and self drilling screws.

Centered set screw means you drill and tap holes right where you want your line to go. Lines easily 'snap in' with a push of your finger and eliminate the need for zip ties to run lines in parallel.

Made from high strength Copolymer Acetal plastic, NotcHead Line Clamps are heat-resistant with a melting point of 330° F, have low moisture sensitivity, are very wear resistant and easy on painted parts.

After the line is installed, the set screw is completely hidden, giving a clean, elegant look.

NotcHead clamp names are in relation to the hose it is designed to hold.

The NotcHead Soft Line Clamp Builder Kit is the easy way to have everything you need for your project in one box.

This kit includes 48 Clips, the nuts, fasteners, and Self drilling screws that go to them.

Includes:
12  1/2" heater hose and #6 AC line Clips
18  5/8" heater hose and #8 AC line Clips
18  3/4" heater hose and #10 AC line Clips

Centered set screw means you drill and tap holes right where you want your line to go. Lines easily 'snap in' with a push of your finger and eliminate the need for zip ties to run lines in parallel.

Made from high strength Copolymer Acetal plastic, NotcHead Line Clamps are heat-resistant with a melting point of 330° F, have low moisture sensitivity, are very wear resistant and easy on painted parts.


After the line is installed, the set screw is completely hidden, giving a clean, elegant look.

NotcHead clamp names are in relation to the hose it is designed to hold.

If you’re looking to have everything in your engine bay as top-notch as the rest of your ride, having beautiful firewall rings might be just what you need.  With a threaded back and ABS nut you can unsure and nice tight fit on almost any fire wall thickness.

These Rings are sized for 1/2" Heater Hoses and 6# AC Hoses.  Cutting one of those hoses in the ring and feeding wires is a option to use these as wire ways.

If you’re looking to have everything in your engine bay as top-notch as the rest of your ride, having beautiful firewall rings might be just what you need.  With a threaded back and ABS nut you can unsure and nice tight fit on almost any fire wall thickness.

These Rings are sized for 1/2" Heater Hoses and 6# AC Hoses.  Cutting one of those hoses in the ring and feeding wires is a option to use these as wire ways.

If you’re looking to have everything in your engine bay as top-notch as the rest of your ride, having beautiful firewall rings might be just what you need.  With a threaded back and ABS nut you can unsure and nice tight fit on almost any fire wall thickness.

These Rings are sized for 1/2" Heater Hoses and 6# AC Hoses.  Cutting one of those hoses in the ring and feeding wires is a option to use these as wire ways.

If you’re looking to have everything in your engine bay as top-notch as the rest of your ride, having beautiful firewall rings might be just what you need.  With a threaded back and ABS nut you can unsure and nice tight fit on almost any fire wall thickness.

These Rings are sized for 5/8" Heater Hoses and 8# AC Hoses.  Cutting one of those hoses in the ring and feeding wires is a option to use these as wire ways.

If you’re looking to have everything in your engine bay as top-notch as the rest of your ride, having beautiful firewall rings might be just what you need.  With a threaded back and ABS nut you can unsure and nice tight fit on almost any fire wall thickness.

These Rings are sized for 5/8" Heater Hoses and 8# AC Hoses.  Cutting one of those hoses in the ring and feeding wires is a option to use these as wire ways.

If you’re looking to have everything in your engine bay as top-notch as the rest of your ride, having beautiful firewall rings might be just what you need.  With a threaded back and ABS nut you can unsure and nice tight fit on almost any fire wall thickness.

These Rings are sized for 5/8" Heater Hoses and 8# AC Hoses.  Cutting one of those hoses in the ring and feeding wires is a option to use these as wire ways.

If you’re looking to have everything in your engine bay as top-notch as the rest of your ride, having beautiful firewall rings might be just what you need.  With a threaded back and ABS nut you can unsure and nice tight fit on almost any fire wall thickness.

These Rings are sized for 3/4" Heater Hoses and 10# AC Hoses.  Cutting one of those hoses in the ring and feeding wires is a option to use these as wire ways.

If you’re looking to have everything in your engine bay as top-notch as the rest of your ride, having beautiful firewall rings might be just what you need.  With a threaded back and ABS nut you can unsure and nice tight fit on almost any fire wall thickness.

These Rings are sized for 3/4" Heater Hoses and 10# AC Hoses.  Cutting one of those hoses in the ring and feeding wires is a option to use these as wire ways.

The NotcHead Braided Line Clamp Builder Kit is the easy way to have everything you need for your project in one box.

This kit includes 60 Clips, the nuts, fasteners, and Self drilling screws that go to them.

Includes:

• 18 AN-3
• 12 AN-4
• 18 AN-6
• 12 AN-8

Upgrade from metal line clamps to NotcHead Line Clamps; the easiest way to secure lines and eliminates the need for Z-bends to adjust for fittings. 

• Sold in packs of 6
• With all the Hardware needed to mount

Upgrade from metal line clamps to NotcHead Line Clamps; the easiest way to secure lines and eliminates the need for Z-bends to adjust for fittings. 

• Sold in packs of 6
• With all the Hardware needed to mount

Upgrade from metal line clamps to NotcHead Line Clamps; the easiest way to secure lines and eliminates the need for Z-bends to adjust for fittings. 

• Sold in packs of 6
• With all the Hardware needed to mount

Upgrade from metal line clamps to NotcHead Line Clamps; the easiest way to secure lines and eliminates the need for Z-bends to adjust for fittings. 

• Sold in packs of 6
• With all the Hardware needed to mount

NotcHead hard line clamps are an easier way to secure lines. Crafted from high-strength, copolymer acetal plastic, these uniquely designed clamps feature center set screws—and once installed, your lines simply "snap in" with the push of your finger. The hard line clamps are heat-resistant with a melting point of 330 degrees F. They also have low-moisture sensitivity, great wear resistance, are easy on painted parts, and are available for a variety of line diameters. Packs of 6 are offered with fasteners, or choose a bulk pack of 12 without fasteners to refill your Builder kit. If you're running brake lines, fuel lines, or plumbing other hard lines, NotcHead clamps are quick, safe, and will result in a clean, professional appearance. Order the set that best fits your hose diameter.

Complete solution for an elegant floor dimmer switch
Create a clean edge around the switch faster than binding, better looking than plastic grommets, and easy to install

• Adjustable - works with any carpet thickness
• Available in Satin, Polished and Black Anodized

Complete solution for an elegant floor dimmer switch
Create a clean edge around the switch faster than binding, better looking than plastic grommets, and easy to install

• Adjustable - works with any carpet thickness
• Available in Satin, Polished and Black Anodized

Complete solution for an elegant floor dimmer switch
Create a clean edge around the switch faster than binding, better looking than plastic grommets, and easy to install

• Adjustable - works with any carpet thickness
• Available in Satin, Polished and Black Anodized

• Grade 5 Stainless Steel
• CNC Machined & Cleaned
• Each Bolt Come With A Neoprene-Bonded Stainless Steel Washer
• Can be used as a safety bolt
• Kits Available

• Grade 5 Stainless Steel
• CNC Machined & Cleaned
• Each Bolt Come With A Neoprene-Bonded Stainless Steel Washer
• Can be used as a safety bolt
• Kits Available

• Grade 5 Stainless Steel
• CNC Machined & Cleaned
• Each Bolt Come With A Neoprene-Bonded Stainless Steel Washer
• Can be used as a safety bolt
• Kits Available

• Grade 5 Stainless Steel
• CNC Machined & Cleaned
• Each Bolt Come With A Neoprene-Bonded Stainless Steel Washer
• Can be used as a safety bolt
• Kits Available

• Grade 5 Stainless Steel
• CNC Machined & Cleaned
• Each Bolt Come With A Neoprene-Bonded Stainless Steel Washer
• Can be used as a safety bolt
• Kits Available

NotcHead hard line clamps are an easier way to secure lines. Crafted from high-strength, copolymer acetal plastic, these uniquely designed clamps feature center set screws—and once installed, your lines simply "snap in" with the push of your finger. The hard line clamps are heat-resistant with a melting point of 330 degrees F. They also have low-moisture sensitivity, great wear resistance, are easy on painted parts, and are available for a variety of line diameters. Packs of 6 are offered with fasteners, or choose a bulk pack of 12 without fasteners to refill your Builder kit. If you're running brake lines, fuel lines, or plumbing other hard lines, NotcHead clamps are quick, safe, and will result in a clean, professional appearance. Order the set that best fits your hose diameter.

NotcHead hard line clamps are an easier way to secure lines. Crafted from high-strength, copolymer acetal plastic, these uniquely designed clamps feature center set screws—and once installed, your lines simply "snap in" with the push of your finger. The hard line clamps are heat-resistant with a melting point of 330 degrees F. They also have low-moisture sensitivity, great wear resistance, are easy on painted parts, and are available for a variety of line diameters. Packs of 6 are offered with fasteners, or choose a bulk pack of 12 without fasteners to refill your Builder kit. If you're running brake lines, fuel lines, or plumbing other hard lines, NotcHead clamps are quick, safe, and will result in a clean, professional appearance. Order the set that best fits your hose diameter.

NotcHead hard line clamps are an easier way to secure lines. Crafted from high-strength, copolymer acetal plastic, these uniquely designed clamps feature center set screws—and once installed, your lines simply "snap in" with the push of your finger. The hard line clamps are heat-resistant with a melting point of 330 degrees F. They also have low-moisture sensitivity, great wear resistance, are easy on painted parts, and are available for a variety of line diameters. Packs of 6 are offered with fasteners, or choose a bulk pack of 12 without fasteners to refill your Builder kit. If you're running brake lines, fuel lines, or plumbing other hard lines, NotcHead clamps are quick, safe, and will result in a clean, professional appearance. Order the set that best fits your hose diameter.

NotcHead hard line clamps are an easier way to secure lines. Crafted from high-strength, copolymer acetal plastic, these uniquely designed clamps feature center set screws—and once installed, your lines simply "snap in" with the push of your finger. The hard line clamps are heat-resistant with a melting point of 330 degrees F. They also have low-moisture sensitivity, great wear resistance, are easy on painted parts, and are available for a variety of line diameters. Packs of 6 are offered with fasteners, or choose a bulk pack of 12 without fasteners to refill your Builder kit. If you're running brake lines, fuel lines, or plumbing other hard lines, NotcHead clamps are quick, safe, and will result in a clean, professional appearance. Order the set that best fits your hose diameter.

Leave your tape in the toolbox! Made from Co-Polymer Delrin to keep your expensive AN fittings pristine. Fitting on your standard SAE wrenches there is no need to have to keep another set of wrenches. The kit includes 6 Inserts: AN-3 AN-4 AN-6 3/4"(for the other side of a AN-6 line) AN-8 AN-10

NotcHead Shop Grip Great for polishing, grinding and wire-wheeling most sizes of bolts and screws Hard Anodized Aluminum for Extreme Durability 'Global Media Award' Winner At SEMA 2012 For New Product